Countdown
The Countdown application works much like an egg-timer. The time format is 00:00:00 (hh:mm:ss). Set the time, press start, and an alarm will ring and a screen signal will occur when the clock countdown completes.
The Countdown application has 7 functions:
1. Set time - (while stopped) Jog-Dial up/up arrow to get into 'Set Time' mode.
While in set time mode use the left/right buttons to choose a number and the up/down buttons to change time. To get out Jog-Dial in or press select.
2. Start - (while stopped) push in jog-dial, or press select
3. Stop/Pause - (while running) push in jog-dial, or press select
4. Reset - (while stopped) push in jog-dial/press selct and hold for >4 seconds
5. Repeat - (while stopped) Jog-Dial down/down arrow to get into 'Set repeat' mode and then press up/down to set and unset the repeat command. Push in jog dial or press select to save your setting and exit 'Set repeat' mode.
6. Go to Stop Watch - (while stopped) push down on the jog-dial, or left on select
7. Go to the Clock - (while stopped) push up on the jog-dial, or right on select
Next->Setting the countdown time with the jogdial
Return to Jog Dial Controls
